On Tue, 22 Mar 2022 14:40:51 +0800, Jason Wang <jasow...@redhat.com> wrote: > > 在 2022/3/14 下午5:34, Xuan Zhuo 写道: > > The virtio spec already supports the virtio queue reset function. This > > patch set > > is to add this function to the kernel. The relevant virtio spec information > > is > > here: > > > > https://github.com/oasis-tcs/virtio-spec/issues/124 > > > > Also regarding MMIO support for queue reset, I plan to support it after this > > patch is passed. > > > > This patch set implements the refactoring of vring. Finally, the > > virtuque_resize() interface is provided based on the reset function of the > > transport layer. > > > > Test environment: > > Host: 4.19.91 > > Qemu: QEMU emulator version 6.2.50 (with vq reset support) > > > It would be better if you can post Qemu code for review as well.
OK. > > > > Test Cmd: ethtool -G eth1 rx $1 tx $2; ethtool -g eth1 > > > > The default is split mode, modify Qemu virtio-net to add PACKED > > feature to test > > packed mode. > > > > Please review. Thanks. > > > Looks good overall, see comments in individual patch. > > I think the code is structured in a way that is not friendly to the > reviewers. For next version, we can bring back the ethtool -G for > virtio-net. OK. Thanks. > > Thanks > > > > > > v8: > > 1. Provide a virtqueue_reset() interface directly > > 2. Split the two patch sets, this is the first part > > 3. Add independent allocation helper for allocating state, extra > > > > v7: > > 1. fix #6 subject typo > > 2. fix #6 ring_size_in_bytes is uninitialized > > 3. check by: make W=12 > > > > v6: > > 1. virtio_pci: use synchronize_irq(irq) to sync the irq callbacks > > 2. Introduce virtqueue_reset_vring() to implement the reset of vring > > during > > the reset process. May use the old vring if num of the vq not change. > > 3. find_vqs() support sizes to special the max size of each vq > > > > v5: > > 1. add virtio-net support set_ringparam > > > > v4: > > 1. just the code of virtio, without virtio-net > > 2. Performing reset on a queue is divided into these steps: > > 1. reset_vq: reset one vq > > 2. recycle the buffer from vq by virtqueue_detach_unused_buf() > > 3. release the ring of the vq by vring_release_virtqueue() > > 4. enable_reset_vq: re-enable the reset queue > > 3. Simplify the parameters of enable_reset_vq() > > 4. add container structures for virtio_pci_common_cfg > > > > v3: > > 1. keep vq, irq unreleased > > > > Xuan Zhuo (16): > > virtio: add helper virtqueue_get_vring_max_size() > > virtio: struct virtio_config_ops add callbacks for queue_reset > > virtio_ring: update the document of the virtqueue_detach_unused_buf > > for queue reset > > virtio_ring: remove the arg vq of vring_alloc_desc_extra() > > virtio_ring: extract the logic of freeing vring > > virtio_ring: split: extract the logic of alloc queue > > virtio_ring: split: extract the logic of alloc state and extra > > virtio_ring: split: extract the logic of attach vring > > virtio_ring: split: extract the logic of vq init > > virtio_ring: split: implement virtqueue_resize_split() > > virtio_ring: packed: extract the logic of alloc queue > > virtio_ring: packed: extract the logic of alloc state and extra > > virtio_ring: packed: extract the logic of attach vring > > virtio_ring: packed: extract the logic of vq init > > virtio_ring: packed: implement virtqueue_resize_packed() > > virtio_ring: introduce virtqueue_resize() > > > > drivers/virtio/virtio_mmio.c | 2 + > > drivers/virtio/virtio_pci_legacy.c | 2 + > > drivers/virtio/virtio_pci_modern.c | 2 + > > drivers/virtio/virtio_ring.c | 604 ++++++++++++++++++++++------- > > include/linux/virtio.h | 5 + > > include/linux/virtio_config.h | 12 + > > 6 files changed, 494 insertions(+), 133 deletions(-) > > > > -- > > 2.31.0 > > > _______________________________________________ Virtualization mailing list Virtualization@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/virtualization