I've just tested kiax.. same here.. no delay.. however the ATA box produces delay after the first call.. but doesn't with zaphfc.
On Tuesday 28 February 2006 18:37, Florian Heese wrote: > Hello, > > I can confirm your point. > > my "delay - setup" was: > > +------------+ > telco <---> | hfc_pci_te | > (ARCOR) | hfc_pci_nt | <-----> phone > > | asterisk | > > +------------+ > > after the second call via the telco to the phone connected to the > hfc-pci_nt I got the delay. After such a call I can hear the last frames of > the last call if i pick up the phone connected to the hfc_pci_nt (duration > is the delay period). If I get "a second" call and pick up the phone I can > hear the last frames from the last call too. > > nimbus2k*CLI> show channels > Channel Location State Application(Data) > VISDN/visdn0/114.O [EMAIL PROTECTED]:1 Up Bridged > Call(VISDN/visdn1/1.I) > VISDN/visdn1/1.I [EMAIL PROTECTED] Up > Dial(VISDN/visdn0/9514608&IAX2 > > > The other direction from the phone connected to the hfc-pci_nt to a phone > via the telco there is no delay. > > "After setting up the delay" I made a call via softphone (Kiax) direct to > the phone and there was no delay. Also "the last frames from the last call" > dissappeared when i picked up the phone... > > nimbus2k*CLI> show channels > Channel Location State Application(Data) > VISDN/visdn0/113.O [EMAIL PROTECTED]:1 Up Bridged > Call(IAX2/fheese_local > IAX2/fheese_local-2 [EMAIL PROTECTED] Up > Dial(VISDN/visdn0/9514608) > > > > kind regards > > fheese > > Am Dienstag, 28. Februar 2006 18:42 schrieb rusl: > > I have discovered something strange. The delay problem is not apparent > > when I use xlite instead of my ATA box. Still, the first call on the ATA > > box is fine after reloading the modules. > > > > The ATA box is also fine with the zaphfc driver. > > > > On Tuesday 28 February 2006 11:41, Florian Heese wrote: _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
