On Tue, February 28, 2006 22:20, Wolfgang Hottgenroth said: > Hi, > > > finally I managed it! I just followed the configuration samples not > strictly enough and forgot the VISDNOverlapDial. > > But I one question concerning VISDNOverlapDial: It seems to me, that it > waits about 10s for digits before passing them. Is there anyway to > configure this delay? 10s feels somewhat uncomfortable, 5s or so would > also be fine. > > Works VISDNOverlapDial(5) or so? > >
It is 12s, which is the proscribed timeout. There is currently no way to set the timeout, unless you change it in source. The best way to avoid it is to make matching patterns as much as possible, but if you *do* have to have flexible number lengths, you're bound to the 12s delay... (so instead of using 0., use 0XXXXXXXXX if you know a number starting with 0 will always be 10 long...) HTH -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=0 sync_slave=0 timer_card=0 AMD Duron 1GHz - 1GB - * 1.2.1 - vISDN 2 Sweex HFC-PCI cards _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
