Hi as describe in my last email i cant able to place an incoming call using patch 571, but also with my previus working version 544 after i upgrade to new version... I have configure visdn.conf & device file with "Mode P2MP", if i use visdnctl netdev show report good config:
visdn0: UP NT PtMP If i try to see visdn interface from * CLI i have: *CLI> show visdn interfaces -- visdn0 -- Network role : Private Network Outbound type of number : unknown Forced CLI : Forced CLI type of number : unset Tones option : Yes Echo canceller : No Echo canceller taps : 256 (32 ms) Context : custom-visdn Language : Transparent Numbers : 300 Overlap Sending : Yes Overlap Receiving : Yes Call bumping : No CLI rewriting : No National prefix : 0 International prefix : 00 Newtork specific prefix : Subscriber prefix : Abbreviated prefix : Autorelease time : 10 CLIR mode : Default off CLIP enabled : Yes CLIP override : No CLIP default : vISDN <300> CLIP special arrangement : No CLIP Numbers : 300 Parked calls: ------ This very strange because as i can see another post i should see other two line related to Mode configuration & also TEI like: *CLI> show visdn interfaces -- visdn0 -- Role : TE Mode : Point-to-Multipoint TEI : 0 Network role : Private Network Outbound type of number : unknown Forced CLI : Forced CLI type of number : unset Tones option : Yes Echo canceller : No Echo canceller taps : 256 (32 ms) Context : visdn0_in Transparent Numbers : 300 Overlap Sending : Yes Overlap Receiving : No Call bumping : No CLI rewriting : No National prefix : 0 International prefix : 00 Newtork specific prefix : Subscriber prefix : Abbreviated prefix : Autorelease time : 10 CLIR mode : Default off CLIP enabled : Yes CLIP override : No CLIP default : vISDN <300> CLIP special arrangement : No CLIP Numbers : 300 T301: 180 T302: 6 T303: 5 T304: 999 T305: 30 T306: 0 T307: 180 T308: 4 T309: 6 T310: 40 T312: 0 T313: 4 T314: 4 T316: 120 T317: 60 T318: 4 T319: 4 T320: 0 T321: 30 T322: 4 --------------- Is possible some problem when i make the upgrade? Seems * use the old chan_visdn, but as i see from /usr/lib/asterisk/modules the file have correct date of new install... Also i have try a lot of time to recompile/install visdn.. but no success.. many thanks for possible info Sincerelly Dimitri _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
