On Saturday 11 March 2006 00:32, James Harper wrote: > > With P2MP I didn't have any joy, but my testing may be flawed. With P2P, > asterisk detected an incoming call from the PBX into the HFC-4S adapter, > and rang the SIP extension, but the call would not progress from there.
Uhm... if you managed to receive a call the communication on the D channel is going thru, the L1 driver seems to be working fine. It's probably something at a higher level. Can you capture a bunch of attempts with tcpdump -w and send me the dump so that I can try to figure out what is happening? ...and before I forget... is the australian network ETSI-compliant? > I have been corresponding off-list with someone who comes from a > position of authority on the subject. He has said that the HST adapter > uses some custom proprietry circuitry and that some knowledge of this > circuitry would be required to make it work. I see a chip I cannot recognize from the photo, but it seem related to the PCM bus, you won't need it. Bye, -- Daniele Orlandi _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
