linux*CLI> show visdn interfaces
linux*CLI>
-- visdn0 --
Status : Online
Role : TE
Mode : Point-to-Multipoint
TEI : Dynamic
Network role : Private Network
Outbound type of number : unknown
Forced CLI :
Forced CLI type of number : unset
Tones option : Yes
Echo canceller : No
Echo canceller taps : 256 (32 ms)
Context : visdn0_in
Language : en
Transparent Numbers : 300
Overlap Sending : Yes
Overlap Receiving : No
Call bumping : No
CLI rewriting : No
National prefix : 0
International prefix : 00
Newtork specific prefix :
Subscriber prefix :
Abbreviated prefix :
Autorelease time : 10
CLIR mode : Default off
CLIP enabled : Yes
CLIP override : No
CLIP default : vISDN <300>
CLIP special arrangement : No
CLIP Numbers : 300
T301: 180 T302: 6 T303: 5 T304: 999
T305: 30 T306: 0 T307: 180
T308: 4
T309: 6 T310: 40 T312: 0 T313: 4
T314: 4 T316: 120 T317: 60 T318: 4 T319: 4
T320: 0 T321: 30 T322: 4
Parked calls:
linux*CLI> debug visdn q931
vISDN q.931 debugging enabled
-- Registered SIP '299' at 10.2.0.20 port 1000 expires 120
q931 Releasing message
-- Registered SIP '299' at 10.2.0.20 port 5060 expires 120
linux*CLI> show visdn interfaces
linux*CLI>
-- visdn0 --
Status : FAILED!
Network role : Private Network
Outbound type of number : unknown
Forced CLI :
Forced CLI type of number : unset
Tones option : Yes
Echo canceller : No
Echo canceller taps : 256 (32 ms)
Context : visdn0_in
Language : en
Transparent Numbers : 300
Overlap Sending : Yes
Overlap Receiving : No
Call bumping : No
CLI rewriting : No
National prefix : 0
International prefix : 00
Newtork specific prefix :
Subscriber prefix :
Abbreviated prefix :
Autorelease time : 10
CLIR mode : Default off
CLIP enabled : Yes
CLIP override : No
CLIP default : vISDN <300>
CLIP special arrangement : No
CLIP Numbers : 300
Parked calls:
linux*CLI>
thats all i get
shall q.931 debug returns to CLI or i have to look elswhere ?
Thanks
Francesco
> On Thursday 23 March 2006 22:09, [EMAIL PROTECTED] wrote:
> >
> > -- visdn0: MPH-ERROR-INDICATION: 160
> > -- poll timeout = -1
> > -- visdn0: MPH-ACTIVATE-INDICATION
> > -- poll timeout = -1
> > -- visdn0: MPH-ERROR-INDICATION: 160
> > -- poll timeout = -1
> > -- poll timeout = -1
>
> It's not something you should worry about, that's why it is in the debugging
> messages.
>
> Post q931 log, that will be more interesting.
>
> Bye,
>
> --
> Daniele Orlandi
> _______________________________________________
> Visdn-hackers mailing list
> [email protected]
> https://mailman.uli.it/mailman/listinfo/visdn-hackers
>
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
