Hi List Members ;-) Thanks for your support regarding my interface problem. Seems to be solved now. When changing the /etc/visdn/device-xxx files, it seems to be the case that a reboot is the best solution, unloading and loading the drivers takes me in trouble because asterisk does not recognize the visdn interfaces.
The script looks like this: rmmod visdn-hfc-usb rmmod visdn-hfc-pci rmmod visdn-hfc-4s rmmod visdn_hfc_e1 rmmod visdn-ec rmmod visdn-timer-system rmmod visdn-ppp rmmod visdn-streamport rmmod visdn-netdev rmmod visdn_softcxc rmmod visdn_core Am I missing a module? Is there a possibility avoiding the reboot after configuration changes? Second questions is regarding huntgroups. I've configured 3 HFC-PCI Cards, "show visdn channels" shows 6 available B channels, so asterisk recognizes the cards now. *CLI> show visdn channels Interface: visdn0 B1: AVAILABLE B2: AVAILABLE Interface: visdn1 B1: AVAILABLE B2: AVAILABLE Interface: visdn2 B1: AVAILABLE B2: AVAILABLE In my /etc/asterisk/visdn.conf the huntgroup is configured as [huntgroup:telco] mode = sequential members = visdn0 visdn1 visdn2 When asterisk starts the following message appears: huntgroup.c:165 visdn_hg_parse_members: Huntgroup member visdn0 visdn1 visdn2 not found Another question is how I can address the huntgroup in the dial plan? Thanks for your support here at this list, you all are doing a great job. @Daniele, you've done a great job with your drivers!!! BR Mit freundlichen Grüßen Stephan Fuchs Netzwerktechniker CAMDATA GmbH Eickener Straße 133 41063 Mönchengladbach Fon +49 (0) 21 61 185 85 80 Fax +49 (0) 21 61 185 85 85 E-Mail [EMAIL PROTECTED] Web www.camdata.de _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
