Hi
I'm using visdn-devel* and FreePBX 2.0.1 with a HFC-PCI card.
I have configured visdn0 and I use visdn_configurator to load modules.
When I start asterisk using amportal script I get this error in
/var/log/asterisk/full:
May 11 15:57:58 ERROR[26394] libq931: visdn0: socket(PF_LAPD, ...):
Operation not permitted
May 11 15:57:58 WARNING[26394] intf.c: Cannot open interface visdn0,
skipping
May 11 15:58:00 ERROR[26394] libq931: visdn0: socket(PF_LAPD, ...):
Operation not permitted
May 11 15:58:00 WARNING[26394] intf.c: Cannot open interface visdn0,
skipping
May 11 15:58:02 ERROR[26394] libq931: visdn0: socket(PF_LAPD, ...):
Operation not permitted
May 11 15:58:02 WARNING[26394] intf.c: Cannot open interface visdn0,
skipping
Every 2 seconds I get these errors.
On CLI, show visdn interfaces command causes a hang of asterisk.
/usr/sbin/safe_asterisk: line 42: 26353 Segmentation fault
${ASTSBINDIR}/asterisk ${CLIARGS} ${ASTARGS} >&/dev/${TTY} </dev/${TTY}
Asterisk ended with exit status 139
Asterisk exited on signal 11.
If I start asterisk using asterisk -vvvgc logged on as root all works
perfectly and show visdn interfaces shows interface Online.
Imho it's a permission problem.
I already tried to chown /dev/visdn/* to asterisk/asterisk but it had no
effect...
/etc/visdn/device-xxx
#
# Sample configuration file for a HFC-S PCI board in TE mode with the netdev
# interface being named visdn0.
#
<netdev visdn0>
protocol lapd
role TE
mode P2MP
</netdev>
<port st0>
attribute role TE
attribute timer_t1 1500
attribute timer_t3 1500
<chan D>
connectmodule netdev visdn0
</chan>
<chan E>
connectmodule netdev visdn0 echo
</chan>
</port>
in amportal script safe_asterisk has -U and -G switches
What can I do to get all working ?
Thank you
Leo
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
