Hi,
I'm (finally...) trying to setup my visdn box. Unfortunately, I can't seem
to
Instead, I see this, every ten seconds (in asterisk, debug turned on):
-- visdn2: MPH-ERROR-INDICATION: 228
-- set timeout = -1
-- visdn2: MPH-ACTIVATE-INDICATION
-- set timeout = -1
-- visdn2: MPH-ERROR-INDICATION: 228
-- set timeout = -1
-- visdn2: MPH-ERROR-INDICATION: 228
-- set timeout = -1
-- visdn2: MPH-ACTIVATE-INDICATION
-- set timeout = -1
-- visdn2: MPH-ERROR-INDICATION: 228
-- set timeout = -1
/etc/visdn/device-pci-* states:
<netdev visdn2>
protocol lapd
role TE
mode P2P
</netdev>
<port st0>
attribute role TE
attribute timer_t1 1500
attribute timer_t3 1500
<chan D>
connectmodule netdev visdn2
</chan>
<chan E>
connectmodule netdev visdn2 echo
</chan>
</port>
visdn_configurator reports no problems, the files in /sys look sane, ...
The ISDN cable is OK -- it works fine on my old (mISDN) system.
This is kernel 2.6.15 (Ubuntu Dapper), latest visdn snapshot (669).
... so what do I do now?
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | [EMAIL PROTECTED]
Disclaimer: Das Zitat wurde zufällig ausgewählt. | http://smurf.noris.de
- -
Aus Murphy's Gesetze:
Dein Produkt wird von Fachzeitschriften so lange nicht getestet, bis
Konkurrenzprodukte auf den Markt gebracht werden, die besser sind.
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
