Hi Folks,
I'm looking at making a gsm channel status indicator
interface for the modules in the VGSM-II using Asterisk Management
Interface. The VGSM driver generates status change events but how do I
tell which module caused this event? As far as I can tell there is no
module identification in the event data, for instance I have a system
with a four channel card and get these events:
Event: vgsm_net_state
Privilege: call,all
X-vGSM-GSM-Registration: NOT_SEARCHING
Event: vgsm_net_state
Privilege: call,all
X-vGSM-GSM-Registration: NOT_REGISTERED
Ho do I tell which module has gone into which state?
Many thanks in advance for any advice.
Robin Bussell
Development & Senior Support Engineer
This electronic message contains information from Excelerate Technology
Ltd which may be privileged or confidential. The information is intended
for the use of the individual(s) or entity named as the addressee. If
you are not the intended recipient be aware that disclosure, copying,
distribution or use of this information is prohibited. If you have
received this electronic message in error, please notify us by telephone
or email immediately.
________________________________
Tel:
+44(0)845 6585747
Fax:
+44(0)870 0516792
Mob:
+44(0)7760 164551
Website:
www.excelerate.info <http://www.excelerate.info>
<<image001.jpg>>
_______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
