I point my computer on www.GoToMyVNC.com as yo said and this is the results: Checking you out at IP address "61.11.231.8"... 61.11.231.8 is not responding on Display 0. 61.11.231.8 is not responding on Display 1. 61.11.231.8 is not responding on Display 2. 61.11.231.8 is not responding on Display 3. 61.11.231.8 is not responding on Display 4. 61.11.231.8 is not responding on Display 5. 61.11.231.8 is not responding on Display 6. 61.11.231.8 is not responding on Display 7. 61.11.231.8 is not responding on Display 8. 61.11.231.8 is not responding on Display 9.
Scan of "61.11.231.8" is complete. Hit 'reload' or 'refresh' in your browser to scan again. i'm still cannot connect to 192.168.0.22: 5800 out of my lan. "Scott C. Best" <[EMAIL PROTECTED]> wrote: Sylviane: Hello! It sounds like your router is not forwarding the TCP port 5900 data correctly. Try this: startup a web-browser on your VNC machine (192.168.0.22) and point it to www.GoToMyVNC.com, and run the scan there. Also, please verify that you can connect to the VNC Server from *inside* of your LAN, using the 192.168.0.22 address. Some routers will not allow you to connect to the "external IP" (the 61.xx.xx.xx one) from an internal machine. Lastly, I've documented some troubleshooting steps you can take here: http://faq.gotomyvnc.com/fom-serve/cache/4.html I hope this helps! -Scott > I have vnc installed on a computer in my lan and i want to connected > on it with a viewer out of my lan.all the post in my lan are going on > internet trough a router wich is the gateway and on wich is confired the > public IP: 61.xx.xx.xx > > theses are the configuration of this server > > ip adress:192.168.0.22 > > on the properties of current user : > i accept socket connection, put a password and put the display number at 5900 > > on the Nat interface of router (virtual server) which allows so that > remote users accessing services at your local site via public IP > addresses addresses can be automatically redirected to local servers > configured with private IP addresses I have open a port 5900 on the > 192.168.0.22 like this > > Private IP 192.168.0.22 Private Port 5900 Type TCP Public Port 5900 > > when I try to connect to this server with a viewer out of my lan with > the parameters 61.xx.xx.xx :5900 I always have the message "failed to > connect to the server" > > Can somebody tells me what's wrong?thanks _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list Sylviane Kenmogne Inginieur diveloppement [EMAIL PROTECTED] standart:+2372230978 GTS Cameroun,BP11722,Yaoundi --------------------------------- Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en frangais ! Testez le nouveau Yahoo! Mail _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
