I am trying to get a particular program to run via a VNC connection, but am
currently unable to do so. The program does run when invoked via a Hummingbird client connection. Here is the procedure that
works on the Hummingbird connection and I am trying to get to work on the VNC:
1. Connect to the remote client via a telnet session. 2. Type setenv DISPLAY <ip address>:0.0 3. Type setenv FOCUS /FOCUS 4. /usr/tools/cms/bin/focus_data_center
The above procedure works fine via Hummingbird, but not so with VNC. Anyone have
insight into this? Thanks.
Try skipping step 2 in the VNC session.
DISPLAY should already be set to the right value. You shouldn't need to set it again. Also <ipaddress>:0.0 is likely the wrong value if you want it to run in VNC.
If this still doesn't work, you'll have to post more details, like the error messages you get when running the application.
-Kyle
--
_
-------------------------------ooO( )Ooo-------------------------------
Kyle J. McDonald (o o) Systems Support Engineer
Sun Microsystems Inc. |||||
Enterprise Server Products [EMAIL PROTECTED]
1 Network Drive BUR03-4630 \\\// voice: (781) 442-2184
Burlington, MA 01803 (o o) fax: (781) 442-1542
-------------------------------ooO(_)Ooo-------------------------------
_______________________________________________
VNC-List mailing list
[EMAIL PROTECTED]
To remove yourself from the list visit:
http://www.realvnc.com/mailman/listinfo/vnc-list
