Erik, It sounds most likely that you have some special-cases in place in your registry that allow those users to have their own settings. VNC 3.3 just reads the AllowProperties value, if present, from the HKLM locations, and then only reads the user's settings if the AllowProperties value is missing or is set to 1. So it won't read the user's settings unless you've got a set of settings for that particular user, under HKLM, which have AllowProperties missing or set to 1.
Cheers, Wez @ RealVNC Ltd. > -----Original Message----- > From: Erik Soderquist [mailto:[EMAIL PROTECTED] > Sent: 12 January 2006 15:32 > To: James Weatherall > Cc: Marko; vnc-list@realvnc.com; [EMAIL PROTECTED] > Subject: RE: When i change the password to the VNC-server i > get the following problem... > > specifically, sometimes users can still access/set a user specific > password and other options after I've set the regkey to disallow > per-user settings, I've not been able to trace its cause, but > I added a > reg delete to the login script to clean this out automatically on the > stations it happens to. if it were something I could consistently > reproduce, I would have reported it, but since I can't, even > on the same > station that I find it, and I never saw anything in the lists > about it, > I figured it was something specific to my network. > > --- erik > > -----Original Message----- > From: James Weatherall [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 12, 2006 09:40 > To: Erik Soderquist; 'Marko'; vnc-list@realvnc.com > Cc: [EMAIL PROTECTED] > Subject: RE: When i change the password to the VNC-server i get the > following problem... > > Erik, > > What issues are those, out of interest? We've never heard of > any issues > with that functionality of VNC 3.3. > > Cheers, > > Wez @ RealVNC Ltd. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Erik Soderquist > > Sent: 12 January 2006 12:16 > > To: Marko; vnc-list@realvnc.com > > Cc: [EMAIL PROTECTED] > > Subject: RE: When i change the password to the VNC-server i > > get the following problem... > > > [snip] > > I also specifically disable the user's ability to set user specific > > options, though I have had some issues with this working > completely in > > 3.x > > > > --- erik _______________________________________________ VNC-List mailing list VNC-List@realvnc.com To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
