Hello all, I recently installed Vnc, once connected I try to start Xwindows from the console and I get the following message: kpanel: ok, commencing initialization And nothing happens after this message. It appears that the Xwindows is attempting to start because I receive several messages from the video card setting up the proper video settings. (--) Mach64: PCI: Mach64 Rage IIC rev 122, Aperture @ 0xc2000000, Registers @ 0xc3fff000, Block I/O @ 0x2400 (--) Mach64: Card type: PCI (--) Mach64: Memory type: SDRAM (4) (--) Mach64: Clock type: Internal (--) Mach64: Maximum allowed dot-clock: 230.000 MHz (**) Mach64: Mode "1152x864": mode clock = 137.650 (--) Mach64: Illegal mode according to Mach64 BIOS (--) Mach64: Removing mode "1152x864" from list of valid modes. (**) Mach64: Mode "1024x768": mode clock = 115.500 (--) Mach64: Illegal mode according to Mach64 BIOS (--) Mach64: Removing mode "1024x768" from list of valid modes. (**) Mach64: Mode "800x600": mode clock = 69.650 (**) Mach64: Mode "640x480": mode clock = 45.800 (--) Mach64: Virtual resolution: 800x600 (**) Mach64: Video RAM: 4096k (--) Mach64: Using hardware cursor (--) Mach64: Using 16 MB aperture @ 0xc2000000 (--) Mach64: Using 4 KB register aperture @ 0xc3fff000 (--) Mach64: Ramdac is Internal (--) Mach64: Ramdac speed: 230 MHz (--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots (--) Mach64: Font cache: 0 fonts kpanel: waiting for windowmanager kpanel: ok, commencing initialization Is this the proper way to get the Xwindows desktop from within the VNC session from Windows 2000? Thanks for any insight that you may have, Joey C. Williams --------------------------------------------------------------------- To unsubscribe, send a message with the line: unsubscribe vnc-list to [EMAIL PROTECTED] See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
