Hello, i still have a problem to connect to VNC-servers over a RAS connection. This is the situation: We have pc's with static ip's (10.10.10.1 to 10.10.10.99, subnet 255.255.254.0) and a gateway (standard gateway at each pc at 10.10.10.254 for access of a external mainframe). Several PC's running vnc-servers and i can connect inside the network without any problems. Now i have attached another pc (10.10.10.100), equipped with a network and a isdn card. I have started vnc-server and Windows-RAS-server on this machine. I can dial in from remote (over isdn) and if i enter 10.10.10.100:0 in the vnc-viewer i can access this pc, but all other pc's are not reachable. If i look during an online connection to the ip-settings i see, that the ras-server use 192.168.55.1 / 255.255.255.0 and the dial-in 192.168.55.2 / 255.255.255.0. If i now open the vnc-viewer on 10.10.10.100 i can access any other pc on the network (it's then very slow). Which steps are neccessary to access all the other pc from my remote pc over the ras connection. I have read several articels in the archiv, but no one fits my needs. I can not change the standard gateway or the subnet mask. Oliver --------------------------------------------------------------------- To unsubscribe, send a message with the line: unsubscribe vnc-list to [EMAIL PROTECTED] See also: http://www.uk.research.att.com/vnc/intouch.html ---------------------------------------------------------------------
