Using TCP or TLS would avoid open NAT issue, and can cure some naughty SIP
ALG issues as well, assuming you want to tolerate the overhead.

For UDP, we've used both Digest and Source request validation with Polycom
devices. Source validation is probably the easiest route, assuming the UA
doesn't need to receive calls from anyone but its proxy or registrar.
Digest (nonce challenge) is better if you want to accept calls from anyone
who knows your password, but we had an issue with a softswitch that would
properly handle auth channel to INVITE but choked when a BYE was challenged.




Regards,

*Calvin Ellison*
Voice Operations Engineer
[email protected]
+1 (213) 285-0555

-----------------------------------------------
*voxox.com <http://www.voxox.com/> *
5825 Oberlin Drive, Suite 5
San Diego, CA 92121
[image: Voxox]

On Wed, Aug 8, 2018 at 10:43 AM, Carlos Alvarez <[email protected]> wrote:

> Do most of you have the phones authenticate incoming calls?  We haven't
> been, but occasionally find a router that has unfiltered full cone NAT
> (Cisco) or that puts one phone on 5060 with no filtering by IP.  The result
> is that the phone will start ringing at random as script kiddies hit the IP
> and port 5060 trying to find servers to exploit.  I don't see a downside to
> changing to auth, but not having done it outside of a few tests of a small
> number of phones, I figured I would ask.
>
>
> _______________________________________________
> VoiceOps mailing list
> [email protected]
> https://puck.nether.net/mailman/listinfo/voiceops
>
>
_______________________________________________
VoiceOps mailing list
[email protected]
https://puck.nether.net/mailman/listinfo/voiceops

Reply via email to