Mitel sells their own line of ATA's which are just re-badged Mediatrix C7's. If you have access to their tech support (usually have to be an authorized dealer) you should be able to get their full documentation on which units have been certified, and the specific config guides for those that have.
On Fri, Apr 12, 2019 at 11:34 AM Nate Burke <n...@blastcomm.com> wrote: > I've only had to provide POTS termination to 1 MITEL system. I tried > using Linksys/Cisco SPA and Grandstream ATA's, then finally put in an > Adtran TA904 (2nd gen). The Adtran seemed to give the least number of > issues with Lines getting stuck open, Echo, etc. But the (former) > customer was still complaining about some issues when they closed up shop. > > I now need to provide 6 analog lines to hand off to an existing MITEL. > Is there an ATA that's better than a TA908 for doing "Acceptable" POTS > to a MITEL? > > Thanks, > Nate > > > _______________________________________________ > VoiceOps mailing list > VoiceOps@voiceops.org > https://puck.nether.net/mailman/listinfo/voiceops >
_______________________________________________ VoiceOps mailing list VoiceOps@voiceops.org https://puck.nether.net/mailman/listinfo/voiceops
