bei mir schaut das dann leider so aus.
pi@raspberrypi /etc $ vzlogger -c /etc/vzlogger.test [Apr 27 16:34:24][mtr0] Creating new meter with protocol d0. [Apr 27 16:34:24][d0] pullseq len:5 found [Apr 27 16:34:24][mtr0] Meter configured. enabled [Apr 27 16:34:24] New meter initialized (protocol=d0) [Apr 27 16:34:24][mtr1] Creating new meter with protocol d0. [Apr 27 16:34:24][d0] pullseq len:5 found [Apr 27 16:34:24][mtr1] Meter configured. enabled [Apr 27 16:34:24] New meter initialized (protocol=d0) [Apr 27 16:34:24] Have 2 meters. [Apr 27 16:34:24][main] foreground=1, daemon=0, local=0 [Apr 27 16:34:24] NOT Daemonize process... [Apr 27 16:34:24][] ===> Start meters. [Apr 27 16:34:24][mtr0] Meter connection established [Apr 27 16:34:24][mtr0] Meter thread started [Apr 27 16:34:24][mtr0] meter is opened. Start channels. [Apr 27 16:34:24][mtr0] Number of readers: 32 [Apr 27 16:34:24][mtr0] Config.daemon: 0 [Apr 27 16:34:24][mtr0] Config.local: 0 [Apr 27 16:34:24][d0] sending pullsequenz send (len:5 is:5). [Apr 27 16:34:24][mtr1] Meter connection established [Apr 27 16:34:24][mtr1] Meter thread started [Apr 27 16:34:24][mtr1] meter is opened. Start channels. [Apr 27 16:34:24][] Startup done. [Apr 27 16:34:24][mtr1] Number of readers: 32 [Apr 27 16:34:24][mtr1] Config.daemon: 0 [Apr 27 16:34:24][mtr1] Config.local: 0 [Apr 27 16:34:24][d0] sending pullsequenz send (len:5 is:5). meine vzlogger.test: pi@raspberrypi /etc $ cat vzlogger.test /** * vzlogger configuration * * use proper encoded JSON with javascript comments * * take a look at the wiki for detailed information: * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration */ { "retry" : 30, /* how long to sleep between failed requests, in seconds */ "daemon": false, /* run periodically */ "foreground" : true, /* dont run in background (prevents forking) */ "verbosity" : 15, /* between 0 and 15 */ // "log" : "/var/log/vzlogger.log",/* path to logfile, optional */ "local" : { "enabled" : false, /* should we start the local HTTPd for serving live readings? */ "port" : 80, /* the TCP port for the local HTTPd */ "index" : true, /* should we provide a index listing of available channels? */ "timeout" : 30, /* timeout for long polling comet requests, 0 disables comet, in seconds */ "buffer" : 600 /* how long to buffer readings for the local interface, in seconds */ }, "meters" : [{ "enabled" : true, /* disabled meters will be ignored */ "protocol" : "d0", /* use 'vzlogger -h' for list of available protocols */ "device" : "/dev/ttyUSB0", "parity" : "7E1", "baudrate" : 300, "pullseq" : "2f3f210d0a", // HEX Darstellung der Pullsequenz "interval" :120, // Wartezeit bis zum nächsten Pull },{ "enabled" : true, /* disabled meters will be ignored */ "protocol" : "d0", /* use 'vzlogger -h' for list of available protocols */ "device" : "/dev/ttyUSB1", "parity" : "7E1", "baudrate" : 300, "pullseq" : "2f3f210d0a", // HEX Darstellung der Pullsequenz "interval" :120, // Wartezeit bis zum nächsten Pull } ]} pi@raspberrypi /etc $ On 27.04.2014, at 17:13, Udo1 <u...@gmx.net> wrote: > Am 27.04.2014 15:27, schrieb joise...@mac.com: >> gibt es hier was neues? > Hallo Martin, > > die Funktionen von vzlogger wurden um eine pullsequenz erweitert. Am Besten > das neue Image für den RPi runter laden. > https://www.energie-und-it.de/raspi/2014-03-22-raspbian-vz-05-3G.img.zip > http://volkszaehler.org/pipermail/volkszaehler-dev/2013-April/002671.html > > Gruß > Udo >
