Hi Mark,
I had success using your HP3458.exe on my HP3458A! I just backed up my
CAL data a few minutes ago. I have been interested in doing a backup for
several years but kept putting off buying the GPIB to USB adapter. I
have been using a NI GPIB-ENET/100 for some years now and so your
program was a way for me to backup CAL ram at no cost.
The only preparatory steps I needed was to test my GPIB connectivity
with NI Measurement & Automation Explorer's Communicate with Instrument
function. Then I Reset the 34358A and set END to Always. I had NI's I/O
Trace on the whole time just to keep track of everything. I think the NI
488 software is a free download.
Thanks for all the work you did!
Charlie
On 8/21/2014 9:42 PM, Mark Sims wrote:
The program outputs a 2kB (or 2 x 32kB) binary ROM image files files along with
a couple of ASCII format files of the data. 2kb for CAL ram and 32kb for DATA
ram (probably not needed, but it can dump the data RAM chips). The binary
files have the extension .hi and .lo (CAL ram data is only in the high byte of
the memory space).
_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.