Addendum: Serial port will talk to a Solartron 7151 OK.

-----Original Message-----
From: volt-nuts [mailto:volt-nuts-boun...@febo.com] On Behalf Of David C. 
Partridge
Sent: 07 July 2017 13:44
To: 'Discussion of precise voltage measurement'
Subject: [volt-nuts] Solartron 7081 serial comms

Well that's odd.  I just tried to talk to three different 7081s from two 
different computers via the serial port using Putty and a null-modem cable.

Port set for 9600,8,n,1   7081 dip switches in the OFF position.

Result a deafening silence even after an "OUTPUT,RS232,ON" command typed blind 
at the Putty console.

I have buzzed out the serial cable which looks like:

<http://www.gamesx.com/wiki/doku.php?id=x68000:rs232_null_modem_cable_with_p
artial_handshaking>

I know this has worked before as I used the serial port for calibration last 
year.

Should I be using a straight-through cable?  My memory says no, but ...

I even rolled back Windows 10 Creators Update in case that was the culprit.

Help!
Dave

_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

_______________________________________________
volt-nuts mailing list -- volt-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.

Reply via email to