It turns out that the circuit for this part of both the 4708 and 4800 are identical to that of the 4808, so if anyone has access to an original manual for either of those, a scan of the relevant page at 600dpi, mono (not greyscale), and full size would be most gratefully received.
Thanks again, Dave -----Original Message----- From: volt-nuts [mailto:[email protected]] On Behalf Of David C. Partridge Sent: 27 July 2018 10:00 To: [email protected] Subject: [volt-nuts] Scan of one page from the Datron 4808 Reference Handbook? I left my copy of the Datron 4808 Reference with a company for scanning. On checking it after return, they somehow managed to lose one page of the schematics. They also hadn't scanned the page. The missing page is page 11.4-5 which is the Reference Divider Assembly Out/In Guard Interface and Watchdog schematic. I have a low res scan of the schematics which I downloaded from the xdevs.com website, but to replace the missing page I would prefer a proper scan in full size (17x11), 600 dpi, monochrome (not greyscale). Is anyone able to assist please? _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there.
