FWIW, I scanned the 829M manual. (I ended up with the device. - My thanks to John again.)
It should eventually show up on http://bama.edebris.com, and http://www.ko4bb.com/getsimple/index.php?id=manuals, once the respective site owners get around to processing their upload queues. If anyone needs it sooner, please feel free to holler, and I'll put it up "somewhere else". (Is 26MB, and really too big to e-mail.) David On Sat, Oct 6, 2018 at 11:02 AM John Ackermann N8UR <[email protected]> wrote: > > I need to make room in the lab and have decided to part with my RFL* > 829M AC/DC calibrator. It's designed for calibrating 4 1/2 digit meters > and has a voltage range from 2mv to 1100V DC and AC from 50 Hz to 20 > kHz. The current range is 20uA to 1.99999 amps and the resistance range > is 10 to 10M ohms. > > It's in very good condition and I had it calibrated in 2008 (what's a > decade among friends?). It includes the original maintenance/operating > manual. > > Photo attached. I have no idea what this is worth, so I'm open to > offers. Shipping cost from 45409 won't be trivial -- it's 19 x 8.75 > (5U) by 15.5 inches and weighs 45 pounds. > > Thanks, > John > > * I don't know much about "Dowty RFL Industries, Inc." but am told that > they are well known in the utility and transportation industries. The > company seems to still be around though I didn't find calibrators on > their web site. > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there.
