I have used them for both. The standards were sent to their Rome, NY location.
Price wise, the 732B 17025 cal is hard to beat if you can drop it at a local Tektronix office. I think Process Instruments is a good deal for resistance calibrations. The business is next door to Ohm-Labs and the owners are brothers. I have had good experiences with them and they can actually answer questions. Tektronix can be difficult to get specific questions answered. Todd On Friday, August 9, 2019, Victor Silva via volt-nuts < [email protected]> wrote: > Hi, > Has anyone used Tektronix Calibration services? (https://www.tek.com/ > fastquote)I have to send in a Fluke 732B (Volt standard) and a 742A-10K > (resistance standard). > The quotes are about half what Fluke charges for Z540.1 calibration.I'm > just wondering if anyone has had any experience with them and can make any > recommendations. > I have submitted the two RFQs for the two units above and what I am > questioning is they labeled the 742A-10K quote > as:--------------------------------------------------FLUKE 742A-10K > RESISTOR; FIXED; STDRESISTOR, AIR;<0.005%; 1Ω - < 1MΩZ540.1 2-YEAR > Syracuse(Rome), NewYork$226.17 --------------- > ----------------------------------- > The "STD RESISTOR, AIR; <0.005%; 1Ω - < 1MΩ" is in the description and I'm > just wondering if that is a generic name for the service or if that is > really what they are reporting back on my 742A-10K in their cal > report? <0.005% (50ppm) report for a resistor spec'd to 4ppm over one year > would be useless to me. > Thanks,Victor Silva > > > _______________________________________________ > volt-nuts mailing list -- [email protected] > To unsubscribe, go to http://lists.febo.com/mailman/ > listinfo/volt-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ volt-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there.
