* This is the VOP Radius mailing list *
Cary Fitch wrote:
* This is the VOP Radius mailing list *
What version of Rodopi are you on?
CF
----- Original Message -----
From: "Scott Wolf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 05, 2002 11:23 AM
Subject: [VOP RADIUS] Ascend TNT standard attributes
* This is the VOP Radius mailing list *
We are using Rodopi and do get a disconnect reason. Normally either
"User Requested", "Lost Carrier", or "Port Error". We still have not
found a cause for the "Port Error" disconnects. We have found replacing
the clients modems, normally fixes the problem.
Scott Wolf
Network Engineer / VP
Aginet
Cary Fitch wrote:
* This is the VOP Radius mailing list *
Well this is really a Rodopi question, but is any Rodopi user getting the
disconnect reason in the user online usage display?
I get every thing but that Disconnect in R.5.1.
Cary
Also here is a "snippet"
(Debug :00312) 11/4/2002 1:21:28 RECEIVED: 216.86.25.2, code=4
(Accounting
Request), id=91, len=243
( 1) User-Name = [10]"alfslopez\000"
( 4) NAS-IP-Address = 216.86.25.2
( 5) NAS-Port-Id = 263
( 61) NAS-Port-Type = 0 Async
( 6) Service-Type = 2 Framed-User
( 25) Class-ID = [5]"20909"
( 40) Acct-Status-Type = 2 Stop
( 41) Acct-Delay-Time = 0
( 44) Acct-Session-Id = [10]"396545041\000"
( 45) Acct-Authentic = 1 RADIUS
( 28) Idle-Limit = 80
( 46) Acct-Session-Time = 2931
( 42) Acct-Input-Octets = 770836
( 43) Acct-Output-Octets = 6805184
( 47) Acct-Input-Packets = 14977
( 48) Acct-Output-Packets = 15346
(195) Ascend-Disconnect-Cause = 45
(196) Ascend-Connect-Progress = 60
(255) Ascend-Xmit-Rate = 50667
(197) Ascend-Data-Rate = 26400
(198) Ascend-PreSession-Time = 29
(190) Ascend-Pre-Input-Octets = 294
(191) Ascend-Pre-Output-Octets = 271
(192) Ascend-Pre-Input-Packets = 12
(193) Ascend-Pre-Output-Packets = 13
(189) Ascend-First-Dest = 224.0.0.2
(120) Ascend-Modem-PortNo = 13
(121) Ascend-Modem-SlotNo = 8
(122) Ascend-Modem-ShelfNo = 1
( 31) Calling-Station-Id = [10]"3615475378"
( 30) Called-Station-Id = [10]"3616051111"
( 7) Framed-Protocol = 1 PPP
( 8) Framed-Address = 216.86.25.84
----- Original Message -----
From: "Mike Herrera" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, November 03, 2002 11:43 PM
Subject: [VOP RADIUS] Ascend TNT standard attributes
* This is the VOP Radius mailing list *
Disconnect 43 is a PPP CHAP authentication failed. Disconnect 45 is PPP
LCP got terminate request from far end while LCP was in Open State, and
what this means is that the user had a standard, user initiated
disconnect.
MikeH
Mike Herrera
Access One Online Services
http://www.access-one.com
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:vopradius-request@;vircom.com]
On Behalf Of Cary Fitch
Sent: Sunday, November 03, 2002 10:47 PM
To: [EMAIL PROTECTED]
Subject: [VOP RADIUS] Ascend TNT standard attributes
* This is the VOP Radius mailing list *
What is a disconnect cause 43, and also 45?
CF
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
-.-Spam and virus filtered by modusMail using Norman virus engine.-.-
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
-.-Spam and virus filtered by modusMail using Norman virus engine.-.-
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
Version 5.2. Though it also worked fine in the last two versions.
Scott Wolf
**
To leave this list, send an email to [EMAIL PROTECTED]
and put the word "LEAVE" in the BODY of the email.
