* This is the VOP Radius mailing list * It doesn't appear in the error log at as as far as I can tell. I assume it is showing up in the accounting logs, but I haven't tried to disect them to find out.
Mark Thornton San Marcos Internet, Inc 512-393-5300 ----- Original Message ----- From: "Mike McTee" <[EMAIL PROTECTED]> To: "Vop Radius (Mail List)" <[EMAIL PROTECTED]> Sent: Monday, January 06, 2003 3:32 PM Subject: [VOP RADIUS] VOP Radius Interim Packets (was "[ModusMail] [OT] VOP Radius Fix - Nth Request" on ModusMail List) > * This is the VOP Radius mailing list * > Thought I would move this discussion to the correct list! :-) > > Mark > > I'm attempting to implement the "Interim packet" on my Radius server and > was wondering what the interim logging would appear as in the > VPRError.log file? > > I've set my Cisco AS53xx to send AAA packets every 60 seconds and Radius > to 180 seconds. > > Thanks, > Mike McTee > Customer Support > Eastex Net (www.eastex.net) > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > On Behalf Of Mark Thornton > Sent: Monday, January 06, 2003 11:51 AM > To: [EMAIL PROTECTED] > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > * This is the modusmail mailing list * > > BTW, the radius list is [EMAIL PROTECTED] in case anyone needed to > know... > > The option to enable processing of interim packets is in the client > definition at the bottom, "Interval time between interim packets (sec)". > I > have mine currently set to 180 seconds, and my RAS sends interim packets > every 60 seconds. If I miss three consecutive interim packets then I > drop > the user. I had been intending to increase those values, but since my > radius > headaches went away when I enabled this I forgot. It doesn't appear to > be > consuming too much bandwidth though I should probably look at the size > of > the raidus logs ;-) > > This solution doesn't address what to do if the modem bank reboots > before > the interval timeout occurs. My 3Com modems don't go down, and if they > did > it takes longer than three minutes so it would clear the list. If your > modems go down often and can recover faster than your interval time I > would > suggest fixing the modem problem first, then shortning the interval > time. > Remember to make sure you have multiple opportunites to catch an interim > packet before ditching the user. Vircom recommends the interval be three > times the setting on the RAS. > > Mark Thornton > San Marcos Internet, Inc > 512-393-5300 > > > ----- Original Message ----- > From: "John D. Lewis" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, January 06, 2003 11:09 AM > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > > > * This is the modusmail mailing list * > > > > Where is the option located in the radius admin? > > J. Lewis > > ----- Original Message ----- > > From: "Mark Thornton" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, January 06, 2003 11:32 AM > > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > > > > > > * This is the modusmail mailing list * > > > > > > The non resizable screen is definitely a stupid design issue. The > > inability > > > to remove a user with confidence from the interface is annoying. In > our > > case > > > it seems to work sometimes, but not often enough to consider it a > usefull > > > feature. I tend to stop the service, delete the user table and > restart > > when > > > I have a large problem to resolve. > > > > > > As to the issue of the lost RAS server, VOPRadius does support a > remedy > > for > > > this in the interim packets option. Since we enabled this feature we > have > > > minimal problems with lost stop packets ond other wierdness. If you > enable > > > the SNMP functions you will get the feature you are looking for but > it > > tends > > > to be a bit too drastic for my tastes. We would see the snmp fail > for > some > > > reason and dump all the users, then shortly thereafter rediscover > the > RAS > > > and try and rebuild the table. We could never resolve the problem as > no > > > other network related issue ever occured, but when we ditched snmp > and > > with > > > with the interval accounting it has been much smoother. > > > > > > Mark Thornton > > > San Marcos Internet, Inc > > > 512-393-5300 > > > > > > > > > ----- Original Message ----- > > > From: "Total Internet Access" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Monday, January 06, 2003 10:24 AM > > > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > > > > > > > > > * This is the modusmail mailing list * > > > > > > > > These are Indeed Problems that have Never been fixed in the last 4 > or > 5 > > > > years that i have used the program. > > > > vince > > > > ----- Original Message ----- > > > > From: "Jim Barstow" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Monday, January 06, 2003 8:20 AM > > > > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > > > > > > > > > > > * This is the modusmail mailing list * > > > > > > > > If a RAS looses power or drops off ethernet, the users that were > on > that > > > > RAS do not switch to the end state. Manually removing them from > the > > > > online users list doesn't work properly. You click the name, click > > > > remove, confirm the removal, but the user still doesn't switch to > the > > > > end state. > > > > > > > > On top of that, the screen is not resizable so you have to move > > > > scrollbars all over the place to see the data that you need to > see. > > > > When you sort columns, the thing resorts them every few seconds so > > > > scrolling down the list is very difficult because when it resorts > it > > > > takes you back to the top. > > > > > > > > > > > > Jim Barstow > > > > Internet Network Engineer > > > > Local Internet Services, Inc. > > > > PO Box 160 > > > > Ludington, MI 49431 > > > > (231)845-9797 ext. 1103 > > > > > > > > > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] > > > > On Behalf Of Dave Berzins > > > > Sent: Monday, January 06, 2003 10:14 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > > > > > > > > > > > * This is the modusmail mailing list * > > > > > > > > Now I am curious... What's the bug? > > > > > > > > Dave... > > > > > > > > ----- Original Message ----- > > > > From: "Jim Barstow" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Monday, January 06, 2003 8:04 AM > > > > Subject: [ModusMail] [OT] VOP Radius Fix - Nth Request > > > > > > > > > > > > > * This is the modusmail mailing list * > > > > > > > > > > Still wondering if Radius is EOL or if Vircom ever plans on > fixing > the > > > > > > > > > major bug that I have reported several times. They have assured > me > it > > > > > > > > > is not EOL and that they are working on fixes, yet I still deal > with > > > > > the same F***ing bug for the last 5 months. I am getting > frustrated. > > > > > Is there a list I should take my Radius problems to? > > > > > > > > > > > > > > > Jim Barstow > > > > > Internet Network Engineer > > > > > Local Internet Services, Inc. > > > > > PO Box 160 > > > > > Ludington, MI 49431 > > > > > (231)845-9797 ext. 1103 > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED]] > > > > > On Behalf Of Mike Herrera > > > > > Sent: Monday, January 06, 2003 9:54 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: [ModusMail] {OT} MX Lookup Request > > > > > > > > > > > > > > > * This is the modusmail mailing list * > > > > > > > > > > <mx lookup> > > > > > > > > > > Header: > > > > > ID=39024, QR=Response, Opcode=QUERY, RCODE=NAME ERROR > > > > > Authoritative Answer=No, Truncation=No > > > > > Recursion Desired=Yes, Recursion Available=Yes > > > > > QDCOUNT=1, ANCOUNT=0, NSCOUNT=1, ARCOUNT=0 > > > > > Question: > > > > > Name=danagroup.net, QTYPE=MX, QCLASS=1 > > > > > Authority Records Section: > > > > > Name=net > > > > > Type=SOA, Class=1, TTL=86350, RDLENGTH=61 > > > > > Name Server=a.gtld-servers.net, > Mailbox=nstld.verisign-grs.com > > > > > Serial=2003010600, Refresh=1800, Retry=900 > > > > > Expire=604800, Minimum=850 > > > > > --- > > > > > End of output > > > > > > > > > > <all records> > > > > > > > > > > Header: > > > > > ID=38974, QR=Response, Opcode=QUERY, RCODE=NAME ERROR > > > > > Authoritative Answer=Yes, Truncation=No > > > > > Recursion Desired=No, Recursion Available=No > > > > > QDCOUNT=1, ANCOUNT=0, NSCOUNT=1, ARCOUNT=0 > > > > > Question: > > > > > Name=danagroup.net, QTYPE=ALL, QCLASS=1 > > > > > Authority Records Section: > > > > > Name=net > > > > > Type=SOA, Class=1, TTL=86400, RDLENGTH=61 > > > > > Name Server=A.GTLD-SERVERS.net, > Mailbox=NSTLD.VERISIGN-GRS.COM > > > > > Serial=2003010600, Refresh=1800, Retry=900 > > > > > Expire=604800, Minimum=86400 > > > > > --- > > > > > End of output > > > > > > > > > > > > > > > > > > > > Mike Herrera > > > > > Access One Online Services > > > > > http://www.access-one.com > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED]] > > > > > On Behalf Of Suneel Jhangiani > > > > > Sent: Monday, January 06, 2003 8:36 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: [ModusMail] {OT} MX Lookup Request > > > > > > > > > > > > > > > * This is the modusmail mailing list * > > > > > > > > > > Hi, > > > > > > > > > > Can a couple of you do me a favour and do a MX lookup for > > > > > DANAGROUP.NET and let me know the result. > > > > > > > > > > Regards, > > > > > > > > > > Suneel. > > > > > > > > > > ** > > > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > with > > > > > the word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > > > > > > > > ** > > > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > with > > > > > the word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > > > > > > > > ** > > > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > with > > > > > the word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > ** > > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > with > the > > > > word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > > > > > ** > > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > > > > with the word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > > > > > ** > > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > > > > with the word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > > ** > > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > > > with the word "UNSUBSCRIBE" in the body or subject line. > > > > > > > > > > > ** > > To unsubscribe, send an Email to: [EMAIL PROTECTED] > > with the word "UNSUBSCRIBE" in the body or subject line. > > > ** > To unsubscribe, send an Email to: [EMAIL PROTECTED] > with the word "UNSUBSCRIBE" in the body or subject line. > > This message was virus scanned by Eastex Net using ModusMail > > ** > To leave this list, send an email to [EMAIL PROTECTED] > and put the word "LEAVE" in the BODY of the email. ** To leave this list, send an email to [EMAIL PROTECTED] and put the word "LEAVE" in the BODY of the email.
