* This is the VOP Radius mailing list * Brad,
I've got it working right now with RadiusServer as the client type. BUT, I had similar problems in my initial setup. AUTH seemed to work (although not all the time), and I wasn't getting entries in OnlineUsers, nor were accounting packets being processed.
Two things solved it for me:
1) The shared secret was wrong on their side. Once both RADIUS servers were using the right secret, a lot got fixed.
2) On the "Add. Database ID's" tab, make sure your domain is listed in the box labeled "Local Roaming/Domain IDs" with "Clear" checked. This will ensure that your Radius server will process your customers as "local", rather than treating them as roaming users.
Hope that helps!
Regards, Eric Longman Atl-Connect Internet Services
+-------------------------------------------------------+ | Atl-Connect Internet Services http://www.atlcon.net | | 3600 Dallas Hwy Ste 230-288 770 590-0888 | | Marietta, GA 30064-1685 [EMAIL PROTECTED] | +-------------------------------------------------------+
Brad Johnson wrote:
What client type is used with globalpops. I have client definitions setup and have tried with “other” and “Radius Server” and authentication is working however, I get no radius errors when a bad login is used, nor do I get an entry in onlineusers when a good login is used and gets connected.
Also, does globalpops pass on stop packets for users they detect as a ghost … or am I going to have ghost issues with them?
Brad Johnson
Systems Administrator
Local Link Network Operations
** To leave this list, send an email to [EMAIL PROTECTED] and put the word "LEAVE" in the BODY of the email.
