From: Esa Ruoho
Ø Ok, so, anyone have any ideas on how to test this "emits light using free energy" flashlight designed by ADGEX ELFE? Yes. There are many relevant tests which can and should happen without opening the device. Some sound superficial but they provide data points of interest as a whole. Do not over-stress it initially and give it benefit of doubt. There will always be time to do destructive testing later. Much later. I will list the testing that come to mind which do not require opening the device. A lumen meter is essential. 1) With a lumen meter, obtain light emission data over short on-off time cycles in lumens, using recommended cycles (do not deplete the device at the start and let it recharge overnight) 2) Compare the rate of lumen drop-off, minute by minute and day by day for several weeks. Data log everything 3) Attach thermocouples and compare the case temperature vs lumen output. This can be done at the same time as above. 4) Use an RF meter, oscilloscope, audio monitor and radiation monitor to look for correlations with lumen output. 5) If anomalies turn up, try to correlate to astrological of local events such as sunspots or earthquakes 6) Test the light output near wireless routers and other sources of wave energy 7) Let the device recharge overnight near various sources of wave energy to look for changes in light output the following day - based on proximity to power sources during recharge 8) Do all of these tests in a city vs in a rural area and compare results This should require a couple of months to do correctly – after which or sooner, you may decide there is no anomaly at all – but if there is, you will probably know the parameters which affect it.
