Hi Kyle,
Correction: The electromagnet (solenoid) that surrounded the emitter was not 
used for focusing./ Colin
===

 Impulse Gravity Generator Based on Charged YBa_2Cu_3O_{7-y} Superconductor 
with Composite Crystal Structure
http://arxiv.org/abs/physics/0108005v2

"A small solenoid is also wound around the emitter (Fig. 3) so that the 
magnetic field 
can be frozen inside a superconductor when it is cooled down below the critical 
temperature."
===

Interesting that Podkletnov started all this utilizing a Van de Graaf 
generator. Maybe it will work :)

"The old fashioned Van de Graaf generator used in the previous stage of this 
work
was replaced by a high voltage pulse generator as shown in Fig. 4. This pulse 
generator
is executed according to the scheme of Arkadjev-Marx and consists of twenty 
capacitors
(25 nF each) connected in parallel and charged to a voltage up to 50-100 kV 
using a high
voltage transformer and a diode bridge. The capacitors are separated by 
resistive elements
of about 100 k
. The scheme allows to charge the capacitors up to the needed voltage
and then to change the connection from a parallel to a serial one. The required 
voltage is
achieved by changing the length of the air gap between the contact spheres C 
and D. A
syncro pulse is then sent to the contacts C and D which causes an overall 
discharge and
serial connection of the capacitors and provides a powerful impulse up to 2 MV 
which is
sent to the discharge chamber. The use of such an impulse generator allows for 
a precisely
controlled voltage, much shorter charging time and good reproducibility of the 
process
"

Reply via email to