Thanks.
One of Celani's helpers told Krivit that it took 3 days to load the
hydrogen. I wouldn't consider that fast :-). It was interesting though
that after that he could just let the gas out, take the setup with him
to Texas, reload with hydrogen and immediately see the effect and pick
up the electrical resistance value exactly where it was left in its
slight downward slope.
On 08/13/2012 12:05 PM, Teslaalset wrote:
Celani got a patent published early 2011 on treating nickel
nanastructures to get fast and high hydrogen absorbtion in Nickel:
http://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=20110210&CC=WO&NR=2011016014A2&KC=A2
Maybe in the meantime he has advanced this method but it seems to me a
good direction of his thinking.
On Mon, Aug 13, 2012 at 5:41 PM, Andre Blum <[email protected]
<mailto:[email protected]>> wrote:
In the presentation they say they use agents as well:
"We use several layers of "agents", coated around a Si-Al ceramic
surface surrounding the nickel foam, to help RSH atoms to survive
this journey. Some of these agents are ZnO, MgO and ZrO2."
Do I undertand correctly that the Celani treatment mainly consists
of stripping off the plastic insulation off ISOTAN44 and then
running a 2A to 3A current for about 5 minutes? And that this
grows nanostructures on the wire surface? That sounds pretty
simple to try.
On 08/13/2012 11:31 AM, Alain Sepeda wrote:
Quite logical they think about using off the shelves products,
and especially well known techniques used for catalyst that
increase active surface...
Good engineer practice.
maybe mixing that material with other treatment (like the one
Celani do on his wires, but adapted to foam), could even make it
better... maybe is it what they do...
did anybody else thought about using that kind of foam in LENR
research ?
2012/8/13 Andre Blum <[email protected]
<mailto:[email protected]>>
The nickel foam that defkalion describes in their NI-week
slideshow seems to be an off-the-shelve product.
Funny enough, it is available from a company called
ecocatalysis, ecat in short.
The stuff is shown here:
http://ecocatalysis.com/en/products/foam-materials-foam-metals/nickel-foam-en.html
Nice ecat logo!
The photo of the foam is the exactly the same as the one used
in the defkalion slide deck.
Andre
