No separate DC power source is necessary if Duncan's diode fudge is used. Andrew ----- Original Message ----- From: Eric Walker To: [email protected] Sent: Monday, May 27, 2013 12:09 PM Subject: [Vo]:Re: [Vo]:Re: [Vo]:Re: [Vo]:Torbjörn Hartman describes power measurments
On Mon, May 27, 2013 at 11:31 AM, Andrew <[email protected]> wrote: Dave, there are a couple of things wrong with your analysis. First off, the insertion of an isolation capacitor between the main grid transformer and the plug takes care of your "short circuit" problem. And then there's the possibility of injection of RF also, also capacitatively coupled into the plug lines. Assume that the three-phase power coming into the transformer has not been tampered with (seems like a safe assumption, but you never know ;). Assume as well that Dave is correct that at the transformer there will be a DC short to ground. With these assumptions, am I correct in drawing one of the two following conclusions? a.. No hidden DC to the E-Cat resistors exceeded the power measured at the mains; or b.. Rossi or an associate intentionally added an isolation capacitor (i.e., tampered with the mains). Eric
