Hi again (my problems are running fast and furious). I just installed Sarge, upgraded the kernel to 2.4.26 (using the kernel-image-2.4.26-1-k7, cause I'm on AMD). When I try to create my first software raid device I get:
platinum:~# mdadm -C /dev/md0 --level raid1 --raid-disks 2 missing /dev/hdc1 mdadm: SET_ARRAY_INFO failed for /dev/md0: File exists I try it on md1 instead: platinum:~# mdadm -C /dev/md1 --level raid1 --raid-disks 2 missing /dev/hdc1 mdadm: SET_ARRAY_INFO failed for /dev/md1: File exists try it on md3 platinum:~# mdadm -C /dev/md3 --level raid1 --raid-disks 2 missing /dev/hdc1 mdadm: array /dev/md3 started. It starts. I haven't created any md(s) before this, how can they exist? How do I remove them? How do I remove hdc1 from the md? I tried: platinum:/dev# mdadm --remove /dev/md3 /dev/hdc1 mdadm: hot remove failed for /dev/hdc1: Device or resource busy Thanks Jay _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech