On Fri, Aug 13, 2004 at 10:50:52AM -0700, Chris Jenks wrote: > > I'm still struggling to get my Thinkpad 701C (24 MB ram) set up as a > router. It now boots with the vanilla kernel 2.6.7 from the Debian > testing sources, but the second ethernet card (in pcmcia socket 1) is > not accessible.
[snip] > doesn't match the ones in /etc/pcmcia/config.opts: > include memory 0xc0000-0xfffff > include memory 0xa0000000-0xa0ffffff > include memory 0x60000000-0x60ffffff What does the "include port" line look like? On my Debian Dell laptops, I had to change: include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff to: include port 0x100-0x4ff, port 0xc00-0xcff or else the system would hang when starting cardmgr. Not sure if this applies to your situation. I haven't taken the time to investigate why this is necessary. -David _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech
