I don't know. Sorry. -_-' -Mark
On Sun, 14 Nov 2004, Nick Schmalenberger wrote: > > Hmm... I donno. Can you post `lspci -vv` output and can you check your > > BIOS to see if that memory region is occupied or reserved? You might > > also > > wanna try disabling the sound card from your BIOS and see if that does > > anything. Oh, and look up your motherboard model & usb issues on > > google... Otherwise I'm out of ideas!! =( > There aren't any options in my BIOS about io ports in that range, just > for the serial and parallel ports that are much lower. I am also pretty > certain that the conflict is not with my sound card because the usb > controller is initialized well before the sound card. About searching > for my motherboard and usb on google, most of the people seem to be > having IRQ conflicts, not i/o port. I guess that is just because IRQ > conflicts are more common in general. I will append my lspci -vv output. > Maybe you or somebody on this list will see something in it I don't know > about. > Nick > 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host > bridge (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 64 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- > 64bit- FW- AGP3- Rate=x1,x2 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate=<none> > > 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP > bridge (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 128 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > Memory behind bridge: fe400000-febfffff > Prefetchable memory behind bridge: f6000000-f6ffffff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+ > > 0000:00:02.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 0000:00:02.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) > (prog-if 80 [Master]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Region 4: I/O ports at fc90 [size=16] > > 0000:00:02.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev > 01) (prog-if 00 [UHCI]) > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at fca0 [size=32] > > 0000:00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin ? routed to IRQ 9 > > 0000:00:03.0 CardBus bridge: Texas Instruments PCI1251A (rev 01) > Subsystem: IBM: Unknown device 0138 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168, Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 > Memory window 0: 10400000-107ff000 (prefetchable) > Memory window 1: 10800000-10bff000 > I/O window 0: 00004000-000040ff > I/O window 1: 00004400-000044ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ > 16-bit legacy interface ports at 0001 > > 0000:00:03.1 CardBus bridge: Texas Instruments PCI1251A (rev 01) > Subsystem: IBM: Unknown device 0138 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168, Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 > Memory window 0: 10c00000-10fff000 (prefetchable) > Memory window 1: 11000000-113ff000 > I/O window 0: 00004800-000048ff > I/O window 1: 00004c00-00004cff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > > 0000:00:06.0 Communication controller: Lucent Microelectronics WinModem > 56k (rev 01) > Subsystem: CIS Technology Inc Lucent Win Modem > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at fedffc00 (32-bit, non-prefetchable) [size=256] > Region 1: I/O ports at fc88 [size=8] > Region 2: I/O ports at f800 [size=256] > Capabilities: [f8] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA > PME(D0-,D1-,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0000:00:07.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 > Audiodrive (rev 02) > Subsystem: ESS Technology: Unknown device 8898 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min, 6000ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at fcc0 [size=64] > Region 1: I/O ports at fc60 [size=16] > Region 2: I/O ports at fc70 [size=16] > Region 3: I/O ports at fc58 [size=4] > Region 4: I/O ports at fc5c [size=4] > Capabilities: [c0] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2200 > [MagicGraph 256AV] (rev 12) (prog-if 00 [VGA]) > Subsystem: IBM: Unknown device 0137 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 128 (4000ns min, 63750ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f6000000 (32-bit, prefetchable) [size=16M] > Region 1: Memory at fe400000 (32-bit, non-prefetchable) [size=4M] > Region 2: Memory at feb00000 (32-bit, non-prefetchable) [size=1M] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8138 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 4000 [size=256] > Region 1: Memory at 10800000 (32-bit, non-prefetchable) [size=512] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > _______________________________________________ > vox-tech mailing list > [EMAIL PROTECTED] > http://lists.lugod.org/mailman/listinfo/vox-tech > -- Mark K. Kim AIM: markus kimius Homepage: http://www.cbreak.org/ Xanga: http://www.xanga.com/vindaci Friendster: http://www.friendster.com/user.php?uid=13046 PGP key fingerprint: 7324 BACA 53AD E504 A76E 5167 6822 94F0 F298 5DCE PGP key available on the homepage _______________________________________________ vox-tech mailing list [EMAIL PROTECTED] http://lists.lugod.org/mailman/listinfo/vox-tech