On Thu 13 Jan 05, 10:18 AM, Dylan Beaudette <[EMAIL PROTECTED]> said: > Hi everyone, > > I haven't bothered to try out the CDROM drive on this machine since linux was > installed, and now with a 2.6 series kernel my CDROM drive has vanished! (or > at least from the perspective of commands like mount) > > The drive is connected to the primary IDE channel, and my hard drive is > connected to a serial IDE channel. As of kernel 2.6 my hard drive is accessed > as a SCSI device. However, my cdrom drive does not answer to requests sent to > hda,hdb,hdc,hdd ... nor to any SCSI devices... > > I googled for a possible kernel module that I need in order to use this > drive, > but didn't seem to find any pages suggesting that. > > also -- my kern.log and dmesg output don't even mention the drive... > > Any ideas would be quite helpful!
Hi Dylan, If this is 2.6 we're talking about, do: modprobe -a ide_cd If it says "module not found", look in your .config file to see if the module was built into the kernel. Also, ide_cd and ide-scsi are mutually orthogonal. Make sure that ide-scsi is NOT enabled (or that the module is NOT loaded). Also, remove any arguments like: hdX=ide-scsi that you may be passing to the kernel via lilo or grub. HTH, Pete PS- Ignore cdrecord -scanbus. It's useless now. You access the drive using the IDE name, as in: cdrecord dev=/dev/hdX etc etc etc... -- The mathematics of physics has become ever more abstract, rather than more complicated. The mind of God appears to be abstract but not complicated. He also appears to like group theory. -- Tony Zee's "Fearful Symmetry" GPG Fingerprint: B9F1 6CF3 47C4 7CD8 D33E 70A9 A3B9 1945 67EA 951D _______________________________________________ vox-tech mailing list vox-tech@lists.lugod.org http://lists.lugod.org/mailman/listinfo/vox-tech