I put openvswitch on Debian. If I connect the machine up to a regular lan with no vlans, I can configure an IP address with the following it will show br0 getting an IP address.
llow-ovs br0 iface br0 inet dhcp ovs_type OVSBridge ovs_ports eth0 allow-br0 eth0 iface eth0 inet manual ovs_bridge br0 ovs_type OVSPort But, I have another setup where the wire coming in on eth0 has trunked vlans. I would like to have some sort of network interface that connects to vlan 1 on the trunk. I have yet to figure this out. Any tips? Thanks, brian -- Brian Lavender http://www.brie.com/brian/ "There are two ways of constructing a software design. One way is to make it so simple that there are obviously no deficiencies. And the other way is to make it so complicated that there are no obvious deficiencies." Professor C. A. R. Hoare The 1980 Turing award lecture _______________________________________________ vox-tech mailing list vox-tech@lists.lugod.org http://lists.lugod.org/mailman/listinfo/vox-tech