Hi Danny,
See this thread, just talk about it yesterday. ;-)
http://list.voyage.hk/pipermail/voyage-linux/2006-May/000898.html
But I am not sure you can boot from USB successfully. If you have
successful experience on boot voyage from USB, please share with us.
- Punky
Danny Adair wrote:
Hi,
I installed a plain vanilla voyage-0.2 on a usb flash drive on sda
(sda1 is ext2) on my host.
When I boot from it (on the target computer) I get:
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
Warning: unable to open an initial console.
Kernel panic - not syncing: No init found. Try passing init= option
to the kernel
I also see that hda was detected. The target computer has a hard disk
but I don't want to use it at all. I want to boot and work only off
the usb key.
README says:
4.4 Known Issues ======================
- There is a problem reported when installing voyage over usb device
using ub kernel module. Moreover, it is assumed that voyage is
installed in /dev/hda1 of the target platform.
Any ideas? I couldn't find the problem report in the archives.
I suspect that LILO needs to be configured differently but a) I don't
know much about lilo and b) there is /etc/lilo.conf
/etc/lilo.conf.voyage and /etc/lilo.install.conf and I don't know
which one to change.
I changed hda to sda and hda1 to sda1 on all of them but to no avail.
I appreciate any help.
Cheers,
Danny
[EMAIL PROTECTED]
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
P U N K N ! X . c o m
Technology + Lifestyle
(http://www.punknix.com)
V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - Senao NMP-8602 Plus (400mW) is now in stock!
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
