Hello,
I have got soekris net4826 box which is power by POE. i have downloaded
live cd of voyage 0.4.1
After i run boot f0 in minicom, the following was the output.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------------------------------
comBIOS ver. 1.27 20041122 Copyright (C) 2000-2004 Soekris Engineering.
net45xx
0064 Mbyte Memory CPU 80486 133 Mhz
Pri Mas 064MB ATA Flash Disk LBA 977-4-32 62 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000
0:18:0 100B 0020 02000000 0107 0290 00 3F 00 0000E001 A0000000 10
4 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
comBIOS Monitor. Press ? for help.
> boot f0
NSC DP83815/DP83816 Fast Ethernet UNDI,
v1.03
Copyright (C) 2002, 2003 National Semiconductor Corporation
All rights reserved.
Pre-boot eXecution Environment PXE-2.0 (build
082)
Copyright (C) 1997-2000 Intel
Corporation
CLIENT MAC ADDR: 00 00 24 C4 57
EC
CLIENT IP: 192.168.1.20 MASK: 255.255.255.0 DHCP IP:
192.168.1.200
GATEWAY IP:
192.168.1.1
E boot Linux
PX
PXELINUX 3.31 Debian-2007-03-09 Copyright (C) 1994-2005 H. Peter
Anvin
==============================================================================
__
__
\ \/ /___ __ __ ___ ___
___
\ // _ \\ \/ /,-_ |/ _ |/
-_)
\/ \___/ \ / \___,\_
|\___|
_/_/
_'_|
{ V o y a g e } - L i n u
x
< http://linux.voyage.hk
>
1. PXE Boot Voyage Linux with a login
shell
2. Start automated install for WRAP (/dev/hda and 38400 serial
console)
3. Start automated install for ALIX (/dev/hda and 38400 serial
console)
4. Start automated install for 45/48xx (/dev/hda and 19200 serial
console)
5. Start automated install for 55xx (/dev/hda and 19200 serial
console)
6. Start automated install for gerenic PC (/dev/hda and no serial
console)
==============================================================================
i choosed 4th option, after which the configuration file is like this.
Configuration
details:
----------------------
Distribution directory:
/tmp/root
Disk/Flash Device:
/dev/hda
Installation Partition:
/dev/hda1
Bootstrap Partition:
/dev/hda1
Will be mounted on:
/tmp/cf
Target system profile:
4511/4521
Target console:
serial
Target baud rate:
19200
Bootstrap installer: grub
Bootstrap partition: /dev/hda1
====================================================================================
After which troubles starts:--
Copying files .... rsync: writefd_unbuffered failed to write 16 bytes
[sender]:)
rsync: connection unexpectedly closed (44116 bytes received so far)
[sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(453)
[sender]
Fatal Error: Failed to copy
files!
########################################################################
Voyage Linux Auto-Install completes. The system will reboot in 5
secs.
If you want to stop, please press Ctrl+C now
!!
########################################################################
*Can anyone throw light where am i going wrong???*
-regards,
Nithin Kumar D
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
