Hi,
Voyage by defaults starts dnsmasq for lightweight dhcp service. So
disable the lines in /etc/dnsmasq.more.conf.
Regards,
Punky
Guttdude Jenius wrote:
I just installed voyage 0.5.0 to my alix2c2 board. Everything seems
fine except dhcpd. I install dhcp3-server but it keeps saying that
dhcpd: Wrote 0 leases to leases file.
dhcpd: Can't bind to dhcp address: Address already in use
dhcpd: Please make sure there is no other dhcp server
dhcpd: running and that there's no entry for dhcp or
dhcpd: bootp in /etc/inetd.conf. Also make sure you
dhcpd: are not running HP JetAdmin software, which
dhcpd: includes a bootp server.
Here is my dhcpd.conf
...
subnet 192.168.1.0 <http://192.168.1.0> netmask 255.255.255.0
<http://255.255.255.0> {
option routers 192.168.1.222 <http://192.168.1.222>;
pool{
range 192.168.1.1 <http://192.168.1.1> 192.168.1.10
<http://192.168.1.10>;
allow unknown clients;
}
}
...
dhcpd run on eth0 with IP 192.168.1.222 <http://192.168.1.222>.
I have the same config with other distribution and works fine. Any
suggestion?
------------------------------------------------------------------------
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
