Jeff, Thanks for the reply - I think you are correct. I found an earlier post in this list which explained that the two LEDs on the Alix 1C are controlled by the BIOS, and not user controllable.
Bruce. > -----Original Message----- > From: Jeff Dairiki [mailto:[EMAIL PROTECTED] > Sent: Tuesday, 22 July 2008 12:30 AM > To: Bruce Sutherland > Cc: [EMAIL PROTECTED] > Subject: Re: [Voyage-linux] LED control sounds great.. But > which LEDs do we mean? > > On Mon, Jul 21, 2008 at 04:01:51PM +0800, Bruce Sutherland wrote: > > > > I noticed the recent changes allowing LED control. We have > an Alix 1C > > board, reference manual here: > > > > http://www.pcengines.ch/pdf/alix1c.pdf > > > > The only reference to LEDs I can find are the HDLED and > PWRLED pins on > > the front panel header (J26), and following the instructions in the > > README file for controlling the LEDs does not seem to > affect the function of these pins. > > > > Am I looking at the wrong pins? If not, what else could I > be doing wrong? > > > I'm not positive, but I don't think the ALIX 1c has the > programmable LEDs. > Looking at the PC Engines web site, the specs page for the 1c > doesn't list the "three front panel LEDs" that are listed on > the specs pages for the other ALIX models. E.g. compare > > http://www.pcengines.ch/alix2c0.htm > > to > > http://www.pcengines.ch/alix1c.htm > > Jeff > _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
