http://www.foxconnchannel.com/Product/Barebones/NT330i/index.html
http://www.gadgetfolder.com/foxconn-netbox-nt330i-nettop-with-atom-330-and-ion.html However, I am now hitting some problems. The case completely blocks the CPU fan (see photos in second link) resulting in ineffective cooling, constant high fan rpm and fan noise. Within a few seconds of popping off the lid the fan slows to a tolerable (very quiet) RPM. This causes concern for deploying many of these boxes in remote offices - will the heat cause stability problems? I tried to install lm-sensors but sensor-detect couldn't find any temp sensors. I'm sure they are there but the lm-sensors package for lenny doesn't recognize them. There is a lot of forum chatter about this. Compiling the latest lm-sensors would probably fix this. Also, I am noticing a laptop connected to the USB ethernet adapter on this board has a flapping interface every 14-15 minutes. Not sure if this is being caused by the USB dongle or the kernel driver, or who knows... On Fri, Feb 26, 2010 at 12:19 PM, Edwin Whitelaw <[email protected]> wrote: > Frank, > > Whose ATOM board are you using? _______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
