Hi jens, Could you verify that the geometry shows by each machine is the same ? C/H/S ?
Regards. Thierry Museux France Wireless Technologies <http://www.fwt.frmsn> www.fwt.fr msn: <mailto:t...@fwt.fr> t...@fwt.fr Tel: + 33 (0) 1 41 08 70 78 Gsm: + 33 (0) 6 15 22 09 62 De : voyage-linux-bounces+tm=fwt...@list.voyage.hk [mailto:voyage-linux-bounces+tm=fwt...@list.voyage.hk] De la part de Pfau, Jens (SMT GmbH) Envoyé : mardi 31 août 2010 10:32 À : 'Jordi Soucheiron'; 'Sean' Cc : voyage-li...@voyage.hk Objet : AW: [Voyage-linux] Problem to make a backup from CF-Card Hello Jordi, Hello Community, sorry for the late reply, but I was on vacation. The Card is in the same drive as the installation of Voyage Linux. I copy the card with dd if=/dev/sda of=alix.img an restore this Image on a new card with the same size in the same drive with the command dd if=alix.img of=/dev/sda. After the copy i put the Car in the CF-Slot on PC-Engines Alix-Board and start this. After the boot screen there is is only the word Grub with no possibilty of an input. What´s wrong how can i make bootable image? Jens Pfau _____ Von: voyage-linux-bounces+j.pfau=smt...@list.voyage.hk [mailto:voyage-linux-bounces+j.pfau=smt...@list.voyage.hk] Im Auftrag von Jordi Soucheiron Gesendet: Freitag, 20. August 2010 08:41 An: Sean Cc: voyage-li...@voyage.hk Betreff: Re: [Voyage-linux] Problem to make a backup from CF-Card Are you copying just the partition or the full CF? Are you sure that both cards have the same size? Jordi Soucheiron Software Engineer DEXMA Parc Tecnològic la Salle Sant Joan de la Salle, 42 08022 Barcelona t/f: [+34] 93 181 01 96 <http://www.dexmatech.com> www.dexmatech.com <mailto:jsouchei...@dexmatech.com> jsouchei...@dexmatech.com 2010/8/20 Sean <kn...@toaster.net> Jens, Have you seen this wiki document that I wrote? It should explain some things to you. This may be your issue. http://wiki.voyage.hk/dokuwiki/doku.php?id=how_do_i_make_an_image_that_i_can _write_to_a_cf_card Sean On 08/19/2010 05:30 AM, Pfau, Jens (SMT GmbH) wrote: Hallo, i have a problem when i make a image from a cf card with voyage linux. I make the image with dd Command after rewrite the image to another cf card the system will not boot. After the bios screen there are only the word "Grub" on the screen. What´s the problem? Thank you Jens _______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux _______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
