Hi Russell, did you solve that issue? I run here into the same issue with a Alix 3d3...
Best Regards Markus ----- 2012/11/4 Russell Lang <gsv...@ghostgum.com.au> > I have an Alix 3D2 that has been running Voyage 0.6.2 for 3 years. > A new USB device needs a later kernel, so I'm trying to install Voyage > 0.9-rc1. > > I used voyage 0.9-rc1 LiveCD running under VMware Workstation 9 to write > voyage linux to a 4GB CF card via a USB card reader. When I try to boot > on the > Alix I get the following: > > On the console: > GRUB Loading stage 1.5 > GRUB loading, please wait > > On the serial port: > Booting 'Voyage Linux 0.9 (Build Date 20120927)' > > root (hd0,0) > Filesystem type is ext2fs, partition type 0x83 > kernel /vmlinuz root=LABEL=ROOT_FS console=ttyS0,38400n8 > [Linux-bzImage, setup=0x3400, size=0x1c1f20] > initrd /initrd.img > [Linux-initrd @ 0xf1fc000, 0x5a3078 bytes] > > Then the console changes to blinking cursor only. > No more output to serial port. > Boot stalls at this point. > > > With the older 0.6.2 the next step is on the console > Decompressing Linux... Parsing ELF... done. > Booting the kernel. > > Then boot log messages continue on serial port > > Any suggestions on why voyage linux won't boot on the Alix 3D2? > > > Russell Lang gsv...@ghostgum.com.au > Ghostgum Software Pty Ltd http://www.ghostgum.com.au/ > > > _______________________________________________ > Voyage-linux mailing list > Voyage-linux@list.voyage.hk > http://list.voyage.hk/mailman/listinfo/voyage-linux >
_______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux