Hi all, I'm using a wle200nx WiFi card (http://www.pcengines.ch/wle200nx.htm) on a pcengines apu board. I first tried the Debian kernels, but their ath9k driver did not work ("could not reset chip"). Somebody then hinted at Voyage Linux and Lo and behold! the card works. So now I've got two questions for you experts out there:
- what did you change in what is basically a Debian kernel to support this card? Even if I compile 'your' driver in the wheezy kernel, it can't reset the chip... - I'd be happy to use your kernel on my wheezy, but is there a reason you don't include the i2c-core module? I2C doesn't work and I have some sensors attached.. I compiled the module and it works fine, but why is it missing? Also the acpi_cpufreq module is missing, so the CPUs don't throttle to 800 MHz.. thanks a lot, -Christian PS: I was pleasantly surprised to find my apu-leds module in your kernel :) -- _______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux