All voyage linux kernel are compiled with limited ipv6 support. I would suggest you install debian stock kernel for
full ipv6 at the moment.
Regards,
Punky
On 2/1/2016 12:04 AM, Henrik Kressner wrote:
On a ALIX with voyage Version: 0.10.0 I have a IPv6 problem.
When I write:
auto eth1
iface eth1 inet6 static
address 2001:0db8:0:f101::1/64
to /etc/network/interfaces
and reboot ifconfig shows this:
eth1 Link encap:Ethernet HWaddr x
inet6 addr: 2001:db8:0:f101::1/64 Scope:Global
But if i try to ping myself
# ping6 2001:0db8:0:f101::1
PING 2001:0db8:0:f101::1(2001:db8:0:f101::1) 56 data bytes
It just hangs until I press Ctrl C.
The same goes if I use -I eth1 in ping6, but if i down eth1 and write:
# /sbin/ifconfig eth0 inet6 add 2001:0db8:0:f101::1/64
Then up eth1 again, and ping this way:
ping6 2001:0db8:0:f101::1
PING 2001:0db8:0:f101::1(2001:db8:0:f101::1) 56 data bytes
64 bytes from 2001:db8:0:f101::1: icmp_seq=1 ttl=64 time=0.096 ms
64 bytes from 2001:db8:0:f101::1: icmp_seq=2 ttl=64 time=0.103 ms
64 bytes from 2001:db8:0:f101::1: icmp_seq=3 ttl=64 time=0.103 ms
Everythings in order ?
What's going on ?
--
Regards,
Kim-man "Punky" Tse
* Open Source Embedded Solutions and Systems
- Voyage Linux (http://linux.voyage.hk)
- Voyage MPD (http://linux.voyage.hk/voyage-mpd)
- Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store (http://store.voyage.hk)
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
