On Thu, 20 May 2010 14:35:07 -0700 (PDT) Torquil Gault <[email protected]> wrote:
> hi, > > I'm new to ike and all that, but when i connect to the VPN it creates > another default route which then plays havoc with any other > networking stuff I want to do. > > 172.18.40.0 172.18.57.70 255.255.254.0 UG 0 0 0 > tap0 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 > 0 0 eth0 > > is there anyway I can get it to stop adding it as a default route ??? > i had a look thro the doco and googled without luck :( > > many thanks, > > torquil > Hi Torquil, I'm assuming that you're using the Shrew client on Windows. The problem is likely with the policy you have defined for the VPN configuration. If you open the properties for your VPN connection in Access Manager and go to the Policy tab, you'll probably see that "Obtain Topology Automatically or Tunnel All" is selected. To fix the problem, unselect that option and then use the Add button to add specifically the IP network that you wish the VPN to apply to. For example, if your corporate network uses 111.222.333.x, you'd use the following settings: Type: Include Address: 111.222.333.0 Netmask: 255.255.255.0 Note, you may also have to change the VPN definition on the VPN gateway, since some gateways have to have the client and the gateway securing the same network specification exactly. _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
