To whom it may concern:
The guide posted on the Support page ( http://www.shrew.net/support/wiki/HowtoAdtran) suggests that users configure the VPN Selectors in the Netvanta as <Private Internal Subnet> to "Any": This is incorrect and will break all Internet access for the internal subnet because the traffic would be "allowed"; the router thinks that Internet traffic should be sent to the VPN client, instead of "Source NAT'd" as it should be. The correct configuration of the VPN Selectors should be one of the following: (a) <Private Internal Subnet> to <VPN Client Subnet> a. Following the guide this would be 10.1.2.0/24 to 10.2.27.0/24 (b) Any to <VPN Client Subnet> a. Following the guide this would be "Any" to 10.2.27.0/24 Please update the guide posted on the Shrew Support Page. Best regards, Adam Ackerman ADTRAN Netvanta Tech Support
<<image001.jpg>>
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
