On 8/2/2010 10:51 AM, Hank Barnes wrote:
Hi,
I just installed your client on a Windows 7 64 bit Home Premium machine and it
is working great.
I imported a profile for the Cisco VPN I need to connect to and only have one
problem.
It does not seem to be doing a split tunnel for the local LAN traffic, even
though the Cisco PCF file had the
"Allow Local LAN Access" field checked.
I looked through the documentation and it seemed to indicate that this is
supported, but not sure what else I need to do.
any ideas (I'm running version 2.5 of the client).
Hi Hank,
I'm not sure what to suggest. The client supports split tunneling but it
needs a definition of which networks exist on the remote network. If you
look at the debug output, do you see the gateway responding with a list
of split network include definitions? For example, my Cisco ASA responds
with the following ...
10/08/04 22:53:38 ii : received config pull response
10/08/04 22:53:38 ii : - IP4 Address = 10.2.20.1
10/08/04 22:53:38 ii : - IP4 Netmask = 255.255.255.0
10/08/04 22:53:38 ii : - IP4 DNS Server = 10.1.2.100
10/08/04 22:53:38 ii : - IP4 DNS Server = 10.1.2.101
10/08/04 22:53:38 ii : - IP4 WINS Server = 10.1.2.100
10/08/04 22:53:38 ii : - IP4 WINS Server = 10.1.2.101
10/08/04 22:53:38 ii : - Login Banner = Welcome to the ...
10/08/04 22:53:38 ii : - Save Password = 0
10/08/04 22:53:38 ii : - IP4 Split Network Include = ANY:10.1.2.0/24:*
10/08/04 22:53:38 ii : - IP4 Split Network Include = ANY:10.1.3.0/24:*
10/08/04 22:53:38 ii : - IP4 Split Network Include = ANY:10.22.200.0/24:*
10/08/04 22:53:38 ii : - DNS Suffix = shrew.net
10/08/04 22:53:38 ii : - Split Domain = shrew.net
10/08/04 22:53:38 ii : - Split Domain = example.com
10/08/04 22:53:38 ii : - Application Version = Cisco Systems, Inc
ASA5505 Version 8.0(4) built by builders on Thu 07-Aug-08 20:53
-Matthew
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
