Hi First of all thanks a lot for the great software. We have a problem with the Shrewsoft client after resuming from standby (see below). If you need the debug output of the trace utility and / or the client configuration, please let me know.
Best regards Gabriel Problem Using the ShrewSoft client we can establish a VPN connection to our company and access resources via the tunnel. If the laptop is put to standby (without disconnecting / closing the ShrewSoft client) and waken up again, the Shrewsoft client again prompts for the password. The VPN re-connection seem to work when looking at the Shrewsoft client but the remotely located resources cannot be accessed any longer via the VPN tunnel. It works again after restarting iked and ipsecd services. Currently we use a script to kill the Shrewsoft access manager and restart ipsecd and iked services after the laptop wakes up from standby. Environment Laptop: - Windows 7 Ultimate (32 bit) - ShrewSoft 2.1.6-release VPN Enpoint: - SSG 140 with Screenos 6.3.0r1.0 To reproduce - Starting laptop - Establish 3G connection (or other internet connection) - Using ShrewSoft access manager to connect to VPN - Connection is established, remotely located resources can be reached via VPN tunnel - Putting laptop into standby mode - Wake up laptop - Establish 3G connection (or other internet connection) - Shrewsoft access manager now timeouts and prompts again for Username/PW - Shrewsoft access manager establishes connection again successfully - But now remotely located resources cannot be reached via VPN tunnel ________________________________________ Gabriel Müller, Consultant Tel. +41 44 305 95 17, Mobile +41 78 722 72 58 [email protected] AWK Group AG, Leutschenbachstrasse 45 CH-8050 Zürich, www.awk.ch ________________________________________ _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
