I have found that the only way for me to get rid of the "session terminated by gateway" issue was to disable my Windows 7 (64 bits) firewall in addition to setting phase-2 PFS=2. Once the firewall disabled, tunnel remains stable over my wireless Cisco broadband home router/gateway. I have now installed Shrew version 2.1.7 beta but I still have to disable the Windows firewall. Is there a work around to this? After reading many forums, I seem to be the only one in this situation...
Here is my config (xxxxx masks private data): n:version:3 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:phase1-dhgroup:2 n:phase1-life-secs:86400 n:client-dns-used:1 n:client-dns-auto:1 n:client-dns-suffix-auto:1 n:client-splitdns-used:1 n:client-splitdns-auto:1 n:client-wins-used:1 n:client-wins-auto:1 n:phase2-life-secs:3600 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 s:network-host:xxxxxxx s:client-auto-mode:pull s:client-iface:virtual s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk-xauth s:ident-client-type:keyid s:ident-server-type:any s:ident-client-data:xxxxxxx b:auth-mutual-psk:xxxxxxxx s:phase1-exchange:aggressive s:phase1-cipher:auto s:phase1-hash:auto s:phase2-transform:auto s:phase2-hmac:auto s:ipcomp-transform:disabled n:phase2-pfsgroup:2 s:policy-level:auto s:client-saved-username:xxxxxxxx Many thanks
_______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
