I have now found a more permanent workaround by disabling the "Microsoft 
Virtual WiFi Miniport Adapter", which I presume the install program was doing 
and restart was re-enabling.



As described in this other post

http://lists.shrew.net/mailman/htdig/vpn-help/2010-September/003043.html



Hope that helps anyone else with the same problem.





From: [email protected] 
[mailto:[email protected]] On Behalf Of James Hatchell
Sent: 21 October 2010 14:20
To: [email protected]
Subject: Re: [vpn-help] negotiation timout occurred - in Windows 7 64 bits



I am having a very similar problem with Windows 7 x64 Professional with the 
workaround below.



I have been upgrading and since the 2.1.7 RC1 the problem is fixable and 
reproducible.



I am using three IPSEC tunnel connections regularly to netscreen, checkpoint 
and cisco vpn  routers.  The problem happens the same for any of the 
connections and does not seem to be affected whether my parallel OpenVPN 
tunnels are running or not.



After running the Shrew 2.1.7 installation I can connect with no problems until 
I shutdown the laptop.

After a restart of Windows always the same negotiation timeout occurred for any 
of the tunnels.



<<

config loaded for site 'XXXXX'

configuring client settings ...

attached to key daemon ...

peer configured

iskamp proposal configured

esp proposal configured

client configured

local id configured

remote id configured

pre-shared key configured

bringing up tunnel ...

negotiation timout occurred

tunnel disabled

detached from key daemon ...

>>



However if I rerun the installation vpn-client-2.1.7-release.exe (deinstalls, 
removes all services, reinstalls) then it will work perfectly again until the 
next restart of Windows.



<<

config loaded for site 'XXXXX'

configuring client settings ...

attached to key daemon ...

peer configured

iskamp proposal configured

esp proposal configured

client configured

local id configured

remote id configured

pre-shared key configured

bringing up tunnel ...

network device configured

tunnel enabled

>>



Thank you so much for Shrew without which I had not been able to connect to 
these tunnels at all in Win7 x64, but please could you help out because to 
running the installer before I can connect is very frustrating.



Hopefully the above might help others with the same problem.



Cheers,

James.



_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help

Reply via email to